Sewage barrel chassis is made of a traction-coupling system Gakovo, which is a mechanism for loading and unloading with a hydraulic device and hook zahvatnye. Multilift can be installed on any car chassis. This system greatly simplifies and speeds up, reducing the loading and unloading, and a universal.
All equipment, relating Cesspool cleaner is new, made in-house PE «GAZI» - https://www.gazi.com.ua/
- Our cesspoolage / Sludge pumping barrels vyroblyutsya metal or stainless steel with a thickness of 3 mm 8 mm.
- Barrels two welded spherical bottoms, produced by our company, diameter from 500 to 2500 mm.
- We offer both standard barrels, and can produce according to individual dimensions tank, depending on the type of work and conditions, where it will be used by you.
Sewage capacity - insulated chassis, ob'єmom 3,1 cubic meter of dirt
Price: 73 000
Total length: 4500 mm |
Height: 2100 mm |
The diameter of the barrel: 1200 mm |
| sheet thickness: 4 mm |
The tank is made of sheet thickness 4 mm mark 09G2S. Dvostinkova container insulated with polyurethane mid, which keeps its contents warm or cold for a long time.
Bottom виготовлене на власному виробництві з листа сталі товщиною 4 mm diameter 1200 mm.
The back cover opens on hinges entirely aside, which makes it possible to clean the container in the middle. At the rear hatch window is placed tank filling level indicator.
The reservoir has 2 additional breakwaters inside the barrel to extinguish dynamic strokes.
Barrel inside extra reinforced ribs, to prevent deformation capacity during exercise.
Upper hatch on bolted joints 530 mm. Suction-release hole 200 mm. of cast iron latch.
Capacity attached to the I-beam 18.
Behind the bunker in the lower part rollers provided (rink), that simplify the movement and loading container.
Sewage barrel - chassis, ob'єmom 14 cubic meter of dirt
Price: 155 000 UAH
Total length: 6000 mm |
Height: 2700 |
The diameter of the barrel: 1900 mm |
| sheet thickness: 6 mm |
The tank is made of sheet thickness 4 mm mark 09G2S. Dvostinkova insulated container with a polyurethane mid, which keeps its contents warm or cold for a long time.
Bottom виготовлене на власному виробництві з листа сталі товщиною 4 mm diameter 1200 mm.
The back cover opens on hinges entirely aside, which makes it possible to clean the container in the middle. At the rear hatch window is placed tank filling level indicator.
The reservoir has 2 additional breakwaters inside the barrel to extinguish dynamic strokes.
Barrel inside extra reinforced ribs, to prevent deformation capacity during exercise.
Upper hatch on bolted joints 530 mm. Suction-release hole 200 mm. of cast iron latch.
Capacity attached to the I-beam 18.
Behind the bunker in the lower part rollers provided (rink), that simplify the movement and loading container.
